![]() If any DTCs are present, perform appropriate test and repair as necessary. IDM DTCs are cleared by using CLEAR ALL command from the RETRIEVE/CLEAR CONTINUOUS DTCs menu on scan tool. An intermittent fault will store a DTC in the IDM. Injector faults are stored in the IDM and reported to PCM during KOEO ON-DEMAND SELF-TEST and KOEO INJECTOR ELECTRICAL SELF-TEST. ![]() This DTC indicates IDM DTCs are stored in the IDM. Perform this test when directed by QUICK TEST. Clear DTCs and repeat QUICK TEST procedures to ensure all electronic engine control systems are working properly and DTCs are no longer present. DO NOT pierce wires.Īfter each service or repair procedure has been completed, reconnect all components. The Injector Driver Module (IDM) supplies 115-volts DC into each fuel injector connected to engine wiring harness. TEST FJ: INJECTOR DRIVER MODULE (IDM) FEEDBACKĮnsure negative battery cables are disconnected before disconnecting engine wiring harness. Steps that are not relevant have been omitted. Percentage does not work when diagnosing faults, 1 % can be equivalent to 100 %.
0 Comments
Leave a Reply. |